Antelope
Antelope Isochrone 10MX
Antelope Isochrone 10MX
Usually Ships in 1-2 weeks
Couldn't load pickup availability
Specifications
Phase Noise (SSB)
1Hz ≤-70 dBc/Hz
10Hz ≤-87 dBc/Hz
100Hz ≤-114 dBc/Hz
1kHz ≤-130 dBc/Hz
10kHz ≤-140 dBc/Hz
Short-Term Stability
t=1s ≤3E-11
t=10s ≤1.6E-11
t=100s ≤8E-12
Time drift in a 24-hr period:
Warm-Up Time
8 – 10 minutes (depends on ambient temperature)
Word Clock Input
1 x Word Clock Input @ 75 Ohms 3Vpp on BNC 44.1 – 384kHz
Maximum shock withstanding
Non-operating, flight case mounted:
100m/s2 (~10.2 g*), 11 msec half-sine pulse per IEC 60068-2-27:2008
Non-operating, in original packing:
300m/s2 (~30.6 g*), 5 msec half-sine pulse per IEC 60068-2-27:2008
* g – gravitational acceleration
Outputs
Word Clock: 4 x BNC
AES/EBU: 2 x XLR
S/PDIF: 2 x RCA
Word Clock Outputs
4 x Word Clock Outputs @ 75 Ohms 3Vpp on BNC 44.1 – 768 kHz square wave signal
USB I/O
USB 2.0 Hi-Speed; Data stream up to 480Mbits/384kHz, Type B
Clocking System
4th Generation Acoustically Focused Clocking
64-bit DDS
Oven Controlled Crystal Oscillator
Clock Stability
<+/-0.0 2 PPM, oven controlled at 64.5 °C
Atomic Reference Type
Rubidium Ultra-Stable Resonance-Controlled Master Oscillator
Frequency
10 MHz
Frequency Accuracy
Better than ±5E-11 @25C (±0.05 PPB)
Aging
Daily* ±2.5E-11
Monthly* ±1E-10
Yearly ±1E-9
(*After 1 day & 1 month of operation respectively)
Atomic Clock Outputs
10 x BNC Sinusoidal, 10MHz, 75 Ohm, 1Vp typical (unload)
Sample Rates (kHz)
32, 44.1, 48, 88.2, 96, 176.4, 192, 352.8, 384, 768
Word Clock Specs
TTL Level, 75 Ohm Output Impedance
USB
USB 2.0 Full-Speed, Type B, only for control
Operating Temperature
0-50°C, 32-122°F
Weight
2.8 kg/6.17 lb
Dimensions
482.6 (W) х228 (D) х 44 (H) mm
19 (W) x 9 (D) x 1.73 (H) inch
Power Supply
AC
Power Consumption
15 W
Humidity
30 – 80% RH non-condensing
Power Supply Input
100 – 240 V~
Share




